|
|
|
|
A new range of indicator lamps and pushbutton switches: |
| Small | - Dimensions are minimised |
| Light | - Low weight by reducing component count and size |
| Inexpensive | - Component costs and assembly times minimised |
Clip on |
- Bodies clip to housings to speed up fitting |
|
This comprehensive range offers the designer a wide choice of voltages, lenses, housings and functions to cover many applications. |
|
Lenses - available from the Y or J Series with chromed brass or black plastic bezels. In addition, FA, FB, MA, MC domed and flat style lenses can be used. Colours available are amber, blue, green, red, clear or white for all types of lenses. |
|
| ( click on links for data sheets ) | |
|
Panel hole diameters :– |
19 or 22.5mm with MP and FP housings resp. |
|
FXP (22.5mm) for FA and FB lenses |
|
|
Bodies : - |
Clip onto
housings and secured by locking ring. All lamps are MBC (BA9s). |
|
|
TU - transformer lamp enabling low voltage operation of lamps with standard control voltages. Running the bulbs on slightly reduced voltage increases the bulb life typicallly by 4 times. AC Supply: 24, 110, 240, 440Vac 50/60Hz |
|
|
MTU - Transformer lamp with additional facility of multi-testing a group of lamps with a single pushbutton switch. AC Supply: 24, 110, 240Vac 50/60Hz |
|
|
DTU - DC supply multi-test lamp using diode switching to enable lamp testing with a single pushbutton switch. DC Supply: 60V maximum. |
|
|
LU - Direct voltage lamp for use with ac or dc supplies up to 240V. Can hold filament, LED Clusters or neon bulbs. |
|
|
NU - Unit designed with internal circuit to accept neon lamps. Natural neon, green and blue lamps are available AC supply: 110, 240, 440V 50/60Hz |
|
|
IRU - for dc supplies only up to 110V maximum. Can be used with filament or led clusters. An internal resistor reduces the lamp voltage to a standard level below supply volts. Lamp wattage: 2W maximum |
|
Push button Switches |
| SLIC
Pushbutton Switches |
|
|
Modular units using our Y Series pushbutton actuators. The switch blocks are constructed to clip onto the actuator housing. Up to 4 contacts can be used in any combination of normally open or normally closed. |
|
| Pushbuttons/actuators | |
| flush or projecting polycarbonate buttons with chromed brass or black plastic |
|
|
|
Colours available are: amber, blue, green, red, clear, white or black. Suitable
for 19 or 22.5mm panel holes. Switch
blocks - 1 or 2 poles per block. Maximum no. of blocks/unit = 2. Contact ratings: 12A at 380Vac or 16A at
250Vac Momentary contact
only.
Approvals:
VDE, ULR,
CSA, BEAB. All units CE labelled.
Option: End cap terminal
cover. |
| A highly reliable positive break switch conforming to UL1054/EN60947 | |
|
|
Actuator
- 40mm diameter, red, mushroom-headed
pushbutton Push to shut off - Twist to reset Suitable for 22mm diameter panel hole only with keyway. Switch block - 1 or 2 normally closed contacts with positive break action. Contact ratings: 12A at 380Vac or 16A at 250Vac Approvals:
VDE, RU, CRU. All
units CE labelled. Options: end cap terminal cover. 90mm diameter self-adhesive "Emergency Stop" label. |
